ADD: 47-8 HuangZhou Road, Huangyan, Zhejiang,
China
English hot line:
0086-576-84020122
Arabian hot line:
0086-576-84020199
Chinese hot line:
0086-576-84020122
Cell Phone:
0086-13586002000
Fax:
0086-576-84020107
Web Site:
http://www.mega-machinery.com, http://www.megamould.com
E-Mail: hymega@gmail.com

Products
 
MG-880 semi-automatic stretch blow molding machine
Brief introduction

MG-880 semi-automatic stretch blow molding machine, blow molder has been improved on the base of MG-5IIB, designed by CE standard. With microcomputer controlling system, it controls various technical parameter needed more accurately and more steadily. Only one person without special training operates it more easily and more safely. MG-880 is fit to blow carbonated beverage bottles, mineral water bottles, cosmetics bottles and hot-filling bottles, especially oil bottles with handles.

Overview

Each set of MG-880 is composed of two parts: blow unit and preform heater. They control the bottle blowing and preform heating accordingly.
blow molder
*Bottle blow unit
Simple operation and high control precision
MG bottle blow unit is equipped with specially designed PLC control system. It controls the whole bottle production process through a soft touch pad with time control precision up to 0.01 second.
*High quality pneumatic unit

Pneumatic unit provides power for machine movements including machine driving and bottle blowing. MG-880 is equipped with world famous brand components (Festo) to reduce the noise, save energy and produce the high quality production.
blow molders
*Reliable designed clamping system with perfect performance

MG-880 adopts three-plate toggle clamping system to provide powerful clamping force required by high pressure blowing up to 35 bars. Besides, the system has an adjustment device to change the distance between front & middle mold-plate and the position of stretch-seal cylinder required in different mold installation.
*Plenty of assistant units

MG-880 has a plenty of assistant unit to increase the machine’s performance, such as air storage unit to keep the air pressure stable, grease-lubricating unit to reduce mechanical parts’ wear and tear, and multi-utilization air entry unit to meet air compressed air high-pressure single entry mode and high-pressure & low-pressure double entry mode.

*Reliable safety unit

In order to keep both machine and operator safe, MG-880 installs twin startup switches on two sides of the machine, which should be pressed at the same time to start the machine, while there is also an emergency stop button on MG-880 to stop machine urgently if necessary.
blow molder
*Powerful heating capacity with perfect heating result

MG series preform heater adopts infrared lamp as heating unit. Infrared has powerful thermal-radiation capacity, which can heat up preform to required temperature in a very short time, while the strong thermal-penetrability provides continuous and uniform heating inside of preform and over surface of preform.
*Independent heating control system

MG series preform heater adopts independent temperature control unit for each heating zone to offer ideal temperature for various preform. Each heating lamp has a voltage regulator to control the voltage of the heating lamps and keep it working smoothly. With the LED display, it becomes easy and convenient to inspect and adjust the voltage value.

*Perfect cooling design

MG series preform heater is equipped with air-cooling and water-cooling device to remove the remained heat on preform loader and prevent preform neck from deformation. And reliable air exhaust system placed on the heater keeps heating temperature continuous and stable during preform heating process.

*Multi adjusting device

Multi adjusting device placed on the preform heater increases the machine’s agility. With those devices, the heating channel’s width and height can be changed easily according to the different neck size and neck height. The mouth of the air exhaust system is also adjustable to meet different heating requirement.

*Assistant unit for easy operation

For easy operation, MG series preform heater is equipped with plenty of assistant units including centralized cooling water supply system, portable base unit for machine’s convenient moving, reliable air entry unit and so on, which makes operation simple and convenient for customer.
blow molders
Operation

* Step 1

place formed preform onto preform holder of reheating unit. The preform holder carries the preform into oval heating channels where preform will be heated under set temperature. After a heat treatment through the heating channel, rotary prefrom holder will carry the heated preform out of heating channel.
* Step 2

take out the heated preform and place them into the stretch blow mold.

* Step 3

press two startup buttons at the same tine, the machine starts automatic mold blowing process shown as following.

(1) loading preform

(2) pre-blowing with stretching
blow molder
(3) shaping with high air pressure
blow molders
* Step 4
take a finished bottle out of the stretch blow mold.

* Step 5
feed another preform into the rotary preform holder of reheating unit and start another bottle blow process.
Features

1. Produce bottle from 0.1L to 5L(2 cavity) to 6L (1 cavities)
2. Output capacity up to 950BPH for 0.1L using two-cavity blow mold.
3. Advanced PLC control system with a use-friendly panel and time-control precision of PLC up to 0.01second
4. Equipped with special designed air storage unit
5. Using Infrared preform heater
6. Independent Temperature Control for different heating lamp to get ideal preform heating results
7. Heating lamps are adjustable in directions to suit various preforms.
8. Operated only by one person without special training.
9. Simple installation & startup adjustment.

Technical parameter

TYPE

ITEM

UNIT

MG-880 Technical data

Special MG-880
Technical data

Container

Product material

/

PET/PC/PE/PP

PET/PC/PE/PP

Container volume

L

0.1-2.5(2-cavity)
3-6(1-cavity)

0.1-6 (2-cavity)

Theoretic output

Psc/hr

0.1-2.5L: 850
3-6L: 400

0.1-2.5L: 850
3-6L: 600

Max bottle height

M

340

360

Max bottle diameter

mm

170

180

Molding

Max mold plate dimension

mm

420×500

640 × 470

Max mold thickness

mm

250

260

Clamping force

KN

80

160

Mold opening stroke

mm

230

240

Air compressor

Air compressor

M ³ /Mpa

>=0.63/3.0 11

>=1.0/3.0
15

Air pressure for blowing

Mpa

2.0-3.0

2.0-3.0

Power

KW

10.8

10

Main machine electricity

Voltage / frequency

V / Hz

380/50(3phase)

380-240-110/50-60
(3phase)

Main machine

M

1.53×0.62×2.00

1.53×0.71×2.08

Machine size and weight

Main machine weight

T

0.6

0.6

Heater

M

1.10×0.5×1.16

1.62×0.61×1.16

Heater weight

T

0.22

0.22

High pressure compressor

M

1.90×0.75×1.5

1.90×0.75×1.5

Air filter

Kg

10×2pcs

10×2pcs

Safety

Auto emergency alarm

Safety inter-locking device


Container/bottle sample

Some containers produced by MG-880 as follow:

Carbonated Drink Bottles

Edible Oil Bottle

Water Bottle

Wine Bottle


Pesticide Bottle


Medicine Bottle

Jar
   
Above bottles are only for reference, MG-880 produce many other PET containers of various shapes and volumes. If you need more details of MG-880 or other semi-autoamtic stretch blow molding machines, please feel free to contact us or click here for the flyer.
China MG-880 semi-automatic stretch blow molding machine Factoryblow molding machine

 
© 2010 China Zhejiang Taizhou HuangYan Mega Machinery Mold Co., Ltd. All Rights Reserved. Powerby China Products & China Manufacturers
Site Map, Site Map Friendly Links Add Your Links
Chinese Portuguese English Japanese German Arabic Spanish Russian French